Description
Recommended Applications
- Ceramic Tiles
- Vitrified Tiles
- Porcelain Tiles
- Glass Mosaic Tiles
- Marble
- Granite
- Natural Stone
- Light-Coloured Stone
- Interior Wall Installation
- Interior Floor Installation
- Exterior Wall Installation
- Exterior Floor Installation
- Bathrooms
- Kitchens
- Balconies
- Terraces
- Swimming Pools
- Tile-on-Tile Renovation
- Commercial Buildings
- High-Traffic Areas
Recommended Tile Size
- Suitable for medium and large-format tiles.
- Maximum recommended adhesive bed thickness: 12 mm.
- Recommended for porcelain panels, glass mosaics, marble, granite, and natural stone installations requiring enhanced flexibility.
Suitable Substrates
- Concrete
- Cement Plaster
- Cement Mortar Beds
- Cement Screeds
- Brick Masonry
- Cement Terrazzo
- Existing Ceramic Tiles
- Existing Vitrified Tiles
- Existing Natural Stone
- Cement Backer Boards
- Properly Prepared Cementitious Surfaces
Approximate Coverage
- Approx. 55–60 sq. ft. (5.1–5.6 m²) per 20 Kg bag
- Based on a 6 mm × 6 mm square-notched trowel with an average 3 mm adhesive bed thickness
- Actual coverage depends on tile size, substrate condition, and installation technique.
Mixing Instructions
- Mix one 20 Kg bag with approximately 5.5–6 litres of clean water.
- Mix until a smooth, lump-free consistency is achieved.
- Allow the mixture to slake for about 5 minutes, remix, and apply using an appropriately sized notched trowel.
Customer Reviews
There are no reviews yet.